Gate ~ FMCU ~ Benutzerhandbuch/en: Unterschied zwischen den Versionen
< Gate ~ FMCU ~ BenutzerhandbuchZur Versionsübersicht zurückkehren
← Gate ~ FMCU ~ Benutzerhandbuch/en
← Gate ~ FMCU ~ Benutzerhandbuch/en
(→Configuration of the Swing Doors) (Markierung: 2017-Quelltext-Bearbeitung) |
(→Konfiguration des XOVIS Sensors) (Markierung: 2017-Quelltext-Bearbeitung) |
| Zeile 149: | Zeile 149: | ||
The swing doors can have different dimensions. Depending on the width and height, this results in other target parameters for optimal curve passage.[[Datei:image glasdoors.png|ohne|mini]]After a type has been selected, all parameters can be adjusted according to the needs in the interface before they are then activated via the button '''Apply''' in the configuration on the access control. If you change individual values in the display, the settings must first be saved. To do this, click on the diskette symbol on the left of the interface above the file list.[[Datei:image door settings.png|ohne|mini]]After the changes have been saved, you can activate them using the Apply button. | The swing doors can have different dimensions. Depending on the width and height, this results in other target parameters for optimal curve passage.[[Datei:image glasdoors.png|ohne|mini]]After a type has been selected, all parameters can be adjusted according to the needs in the interface before they are then activated via the button '''Apply''' in the configuration on the access control. If you change individual values in the display, the settings must first be saved. To do this, click on the diskette symbol on the left of the interface above the file list.[[Datei:image door settings.png|ohne|mini]]After the changes have been saved, you can activate them using the Apply button. | ||
| − | === | + | ===Configuration of the XOVIS Sensors=== |
| − | '''XOVIS-Sensor | + | '''Add XOVIS-Sensor''' |
| − | + | Navigate to "Configuration" -> "Devices" -> "Xovis Cameras" and then click on the "Add" button[[Datei:add xovis device 1.png|ohne|mini]]The following fields are filled in the order shown: | |
#Name | #Name | ||
#URL | #URL | ||
| − | # | + | #Username |
| − | # | + | #Password |
| − | [[Datei:add xovis device 2.png|ohne|mini]] | + | [[Datei:add xovis device 2.png|ohne|mini]]The configuration is saved by clicking the '''Save''' button.{{Box_Note|Note Text = After adding the XOVIS sensor, the '''FMCU''' must be restarted before proceeding with the configuration.}}'''Add XOVIS monitoring area as alarm signal''' |
| − | + | Navigate to "Configuration" -> "Signals" and then click on the "Add" button[[Datei:add xovis alarm signal 1.png|ohne|mini]]The following fields must be filled in here: | |
| − | # | + | #Select type "XOVIS Sensor" |
| − | # | + | #Specify the name of the signal (e.g. "XOVIS ALARM") |
| − | # | + | #Set the minimum number of people in the alarm zone to trigger an alarm (e.g. 2) |
| − | # | + | #Select the alert type (e.g. "Unauthorized Access") |
| − | # | + | #Determine a list of alarm zones (e.g. "AlarmZone") |
| − | # | + | #Select the XOVIS sensor added to. |
| − | + | The configuration is saved by clicking the '''Save''' button.[[Datei:add xovis alarm signal 2.png|mini|ohne]]'''Add XOVIS counter''' | |
| − | + | Navigate to "Configuration" -> "Signals" and then click on the "Add" button[[Datei:add xovis alarm signal 1.png|ohne|mini]]The following fields must be filled in here: | |
| − | # | + | #Select type "XOVIS Sensor". |
| − | # | + | #Specify the name of the signal (e.g. "XOVIS Counter") |
| − | # | + | #Specify the side of the gate (e.g. "Entrance") |
| − | # | + | #Set the value "Counter". |
| − | # | + | #Specify a list of lines(e.g. "EntryLine") |
| − | # | + | #Select the XOVIS camera that you added earlier. |
| + | |||
| + | The configuration is saved by clicking the '''Save''' button.[[Datei:add xovis counter signal.png|mini|ohne]] | ||
| − | |||
===VPN-Schlüssel hinterlegen=== | ===VPN-Schlüssel hinterlegen=== | ||
Für die Nutzung der Fernwartung wird ein VPN-Schlüssel benötigt. Dieser Schlüssel kann bei Angabe des Projektnamens (Ansicht Konfiguration->Allgemein) beim Support (support@maxcrc.de) von maxcrc angefragt werden. | Für die Nutzung der Fernwartung wird ein VPN-Schlüssel benötigt. Dieser Schlüssel kann bei Angabe des Projektnamens (Ansicht Konfiguration->Allgemein) beim Support (support@maxcrc.de) von maxcrc angefragt werden. | ||