en

Connectivity Board

Contact	Modbus Value/Flag	Type	Impulse	Description
A8	0x47	Output	Yes (200ms)	Person has entered
A9	0x48	Output	No	Alarms*
E3	0x004	Input	No	Fire Alarm
E4	0x008	Input	No	Emergency State button**
E6	0x020	Input	Yes (200ms)	Card is valid, open the gate
E7	0x040	Input	Yes (200ms)	Card is invalid, do not open the gate

*A9 Alarms:

• Gate is out of order, when a mandatory device is broken or a connection to the server is broken (if the server is used in the solution).
• Tailgating or other unwanted actions.
• Entry barcode scanner is broken or it is a stub.
• Gate in in the Fire Alarm or Emergency state. The alarm is produces as a repetitive pulse signal (700ms).
• Gate is open only for exit.

After the Emergency State button pressed, the gate switches to the Emergency State. Then only exit from this state is to restart the gate.

The signal can be set/received to/from a contact from any of the halves of the gate.

Configuration Management

User Interface

The Galaxy Gate is configured through the /configuration page. If the server is running at 192.168.1.221 and port is 8888, the url is:

http://192.168.1.221/configuration

There are two buttons on the page:

Name	Description	Action
Save	Saves the modified configuration to the server	Post
Reset	Discards any changes by reloading the configuration from the server	Get

The configuration is split into sections and subsections:

• General
  • Dispatcher
  • Miscellaneous
• Devices
  • Barcode Reader Entry
  • Barcode Reader Exit
  • Gate
  • Tracking Camera
  • Audio Player
  • Camera
• Displays
  • Display Gate Entry
  • Display Gate Exit
  • Display Entry
  • Display Exit
  • Display TimeInfo

Here are some screenshots: