People Counter Dashboard
Inhaltsverzeichnis
Prepare KBOX A-330-RPI
Download image
| Version | Download Link |
|---|---|
| 1.3.0.1 | http://nas0.dnsalias.com:5000/sharing/wZzteL0s7 |
Copy image to the Micro SD Card
1. Download an image from the table above
2. Extract an archive
3. Use utility HDDRawCopy1.10Portable from the archive to copy the image on the Micro SD Card
Setup XOVIS cameras
Add XOVIS cameras
1. To add a new XOVIS camera, you firstly need to select the Settings/Einstellungen tab
2. Click on the Add/Hinzufügen button
3. Here you should specify the camera URL
4. Specify a login to access the camera
5. Specify a password to access the camera
6. In this field specify the URL of your server (this field will be used for PUSH notification configuration on the camera side)
7. Here, specify the MAC of your camera
8. Save it using Save/Speichern button
Delete XOVIS cameras
1. To remove cameras, mark them
2. Click on the Delete/Löschen button
Setup Areas
Add Areas.
1. Add a new area, you firstly need to go to Settings/Einstellungen
2. Select the Areas/Bereiche tab
3. And Then click on the Add/Hinzufügen button
4. Enter here the name of the area
5. Here you should specify a unique name without spaces and starts with a lowercase letter. This is a service field. For example: If you specified the name "Test", you can specify a unique name "test"
6. Here you can select a theme for the area display. For example:
7. Here you can choose the background for the "Basic" theme. If you want to add an image, you should upload it up to the server. More details on the link upload files
8. This field can be used in case if you want to specify an Offset for counter(for example when people are already in the area, but camera's counter is zero)
9. Click on the Add/Hinzufügen button to add a camera
10. Select the camera that was added earlier. If you do not know how to add a camera to click on this link setup XOVIS cameras
11. Choose the detect type
12. Enter the name line
13. Here we specify the maximum capacity of the number of people
14. Here you can specify the schedule restart counter time. If you need to specify more than 2 values, be sure to separate them with a semicolon
If you need to change the text translation on Area by interval:
15. To add the ability to select a language, click the Add/Hinzufügen button as many times as you need the languages
16. Choose a language
17. Enter the language switching interval in seconds
18. And save it
Delete Areas.
1. To remove Areas, mark them
2. And then click on the Delete/Löschen button
Setup Relay Controllers
Add Relay Controllers
1. To add a new relay controller, you firstly need to select the Settings tab
2. Select the Relay Controllers/Relais-Steuerungen tab
3. And then click on the Add/Hinzufügen button
4. Here you should specify the relay controller URL
5. Select the type of relay controller communication protocol
6. And Save it
Delete Relay Controllers
1. To remove relay controllers, mark them
2. Be careful! Do not remove Relay Controllers that are used/Achtung! Entfernen Sie nicht die verwendeten Relaissteuerungen. Click on the Delete/Löschen button
Setup Output Signals of Relay Controller
Add Output Signals
1. To add a new relay controller, you firstly need to select the Settings tab
2. Select the Output Signals/Ausgangssignale tab
3. And Then to click on the Add/Hinzufügen button
4. Enter here the name of the output signal
5. Here you should select an area
6. Here you should choose the relay controller URL
7. Insert the command of a high level of the relay controller
8. Insert the command of a low level of the relay controller
9. Here you can specify transition delay time
10. This field is necessary to specify the condition of relay triggering
11. Save it
Delete Output Signals
1. To remove output signals, mark them
2. Click on the Delete/Löschen button
Upload files to the server
Add Files.
1. Add a new area, you firstly need to go to Settings/Einstellungen
2. Select the Assets/Anlage tab
3. And then click on the Add/Hinzufügen button and select a file on your file system. If a file is uploaded to the server, you can see it in the file list
Show uploaded image files.
1 If you want to see image files just click on the file list area
Delete Files.
1. To remove files from the server, mark them. Preset files can't be deleted
2. Be careful! Do not remove files that are used. And then click on the Delete/Löschen button
Users
Add a user
1. To add a new user, you firstly need to select the Settings/Einstellungen tab
2. Click on the User/Benutzer tab
3. Then click on the Add/Hinzufugen button
4. In this field you should specify Login/Anmeldung for a new user
5. In this field you should specify Password/Passwort for a new user
6. Click on the Save/Speichern button to complete the adding of new user
Change user credentials
1ю If you want to change user data just click on the user list area
2 Then click on the Edit/Hinzufügen button
3. After that you can change user data
4. And save the changes
Remove a user
1. To remove userы, mark them. Preset files can't be deleted
2. And then click on the Delete/Löschen button
Change browser configuration
Reload browser configuration
1. To display, you firstly need to go to Settings/Einstellungen
2. Select the Display/Bildschirm tab
3. Enter the display URL
4. Then click on the Reload button
